Our Blog

Parents usually have numerous questions about orthodontic treatment for their children. According to the American Association of Orthodontists, orthodontic treatment for children should start at around seven years of age. This allows Dr. Groisser to evaluate the child’s existing and incoming teeth to determine whether or not early treatment might be necessary.

What is early orthodontic treatment?

Early orthodontic treatment, known as Phase One, usually begins when the child is eight or nine years old. The goal is to correct bite problems such as an underbite as well as guide the jaw’s growth pattern. It also helps to make room in the mouth for the permanent teeth to be properly placed as they come in. This will greatly reduce the risk of the child needing extractions later in life due to his or her teeth getting crowded.

Does your child need early orthodontic treatment?

There are several ways that you can determine whether your child needs early treatment. If you observe any of these characteristics or behaviors, you should talk to Dr. Groisser.

• Early loss of baby teeth (before age five)
• Late loss of baby teeth (after age five or six)
• The child’s teeth do not meet properly or at all
• The child is a mouth breather
• Front teeth are crowded (you won’t see this until the child is about seven or eight)
• Protruding teeth, typically in the front
• Biting or chewing difficulties
• A speech impediment
• The child’s jaw shifts when he or she opens or closes the mouth
• The child is older than five years and still sucks a thumb

What are the benefits of seeking orthodontic treatment early?

Early orthodontic treatment is begun while the child’s jaw bones are still soft. They do not harden until the children reach their late teens. Because the bones are still pliable, corrective procedures such as braces work faster than they do for adults.

In short, early treatment at our Clarksburg, Gaithersburg, and Hagerstown office often allows your child to avoid lengthy procedures, extraction, and surgery in adulthood. Early treatment is an effective preventive measure that lays the foundation for a healthy, stable mouth in adulthood.

If you’ve visited Village Orthodontics, then there’s a good chance you’re looking to perfect your smile by straightening your teeth with braces. At some point during your treatment, you may need to use elastics, otherwise known as rubber bands, for a certain period. These are used to apply additional pressure that will move your teeth in the right direction.

Placement of the elastics is specific to each patient’s teeth. These small rubber bands stretch over the tiny loops on both the top and bottom brackets. At first, Dr. Groisser may recommend you wear the elastics both day and night for an extended time.

You may be told to switch only to nighttime wear once the teeth are set in the correct position. By consistently wearing the elastics, you can shorten the overall time your braces will have to be on.

The elastics are made from medical-grade latex. If you have an allergy to latex, make sure to let Dr. Groisser know, so you can be given an alternate material. We will show you how to take elastics on and off when they’re given to you at your appointment.

You should remove them when you eat so they don’t become overstretched or break. It’s important not to overstretch the bands, and always to replace them if they break. Eventually it will become a familiar habit to carry the bands around with you for times when this might happen.

The Do’s and the Don’ts

• DO … always wash your hands before removing or replacing the rubber bands.
• DO … call us if you run out of elastics.
• DO … get in the habit of carrying around extra rubber bands as replacements.
• DON’T … double up on elastics because this can exert too much pressure on your teeth and could actually harm the roots.
• DON’T … overstretch the rubber bands or they will lose strength and become ineffective.

If you were recently given elastics as well as your braces, feel free to ask any questions during your appointment, or call our Clarksburg, Gaithersburg, and Hagerstown office any time. Using elastics correctly is one more step in your journey to a perfect smile!

Getting braces is a huge step in creating the beautiful smile you want. It’s easy to see how important your wires and brackets are. Week by week, you and your family and friends can see the progress you’re making as your teeth become straighter. That makes all the careful brushing, periodic adjustments at our Clarksburg, Gaithersburg, and Hagerstown office, and annoying loose ligatures worthwhile.

And while straight, even teeth are the visible reward you get for your months in braces, there’s a benefit that’s every bit as important that might go unnoticed by your friends and family—a healthy, properly aligned bite.

Many people have some kind of malocclusion, or bad bite. There are several different bite problems we treat. Some of the most common are:

• Overjet (the upper front teeth protrude too far forward over the bottom teeth)
• Underbite (the bottom teeth overlap the top teeth)
• Crossbite (one or more teeth haven’t come in in the proper position, often with an upper tooth fitting inside a lower tooth)
• Open bite (the upper and lower front teeth don’t touch).

When the jaws and teeth don’t fit together properly, you might be looking at damaged teeth, headaches, and painful problems with the temporomandibular joint, or jaw joint, in your future. That’s why correcting your bite early is so important. Using rubber bands with your braces is one of the most popular and effective ways to help create a better bite.

Bands are used with your braces to gradually move your teeth into their best position. Specially designed brackets with tiny hooks are bonded to very specific teeth. Why so specific? Because the placement of the brackets depends on which type of malocclusion we are correcting. Rubber bands are then attached to the bracket hooks, usually from an upper tooth to a lower one. When they are in just the right position, those little bands provide just enough force to move your teeth more quickly and effectively than braces alone can.

If you need bands to help correct any kind of malocclusion, you will play a very important part in your orthodontic treatment. It will be your job to attach your bands every day. Don’t worry—while it can seem confusing at first, we’ll make sure you know exactly how and where to place them.

How long should they stay in? You’ll probably need to wear your bands 24 hours a day. It’s while you’re moving your mouth and jaw muscles that your bands are working their hardest. Talk to us about removing them for brushing and flossing, and whether you should wear them while you eat.

Can you use the same bands over several days? Not a good idea. Bands are selected for size and strength to move your teeth very precisely from visit to visit. When bands stay on too long, they become too stretched out to supply the proper pressure needed to move your teeth efficiently. Dr. Groisser will let you know how long is too long for your specific bands.

Are two bands better than one? Absolutely not. Again, the bands you’re given at each visit are designed for your specific needs. Too much pressure can actually be harmful. Just keep to your recommended schedule of replacing bands, and your orthodontic treatment will stay right on track.

Attaching rubber bands? Keeping them on all during the day? Replacing them as needed? All of these responsibilities might seem a bit overwhelming at first, but we are here to give you all the information and support you need to succeed. Because straight, even teeth and a bite that is healthy and functional? That’s truly how you create your beautiful smile!

We’re all friends here, so if you sometimes feel a bit nervous before your orthodontic appointments, no judging! Ask us about any worries you might have. We are happy to explain procedures, equipment, and your orthodontic options so you know exactly what is going on during treatment. And if X-rays are a concern, we can put your mind at ease here as well.

What Exactly Are X-rays?

Sometimes patients feel reluctant about the process of imaging because X-rays are a kind of radiation. But the fact is, radiation is all around us. We are exposed to radiation naturally from our soil and water, sun and air, as well as from modern inventions such as cell phones, Wi-Fi, and air travel.

Why is radiation so common? Because matter throughout the universe constantly gives off energy, and the energy that is emitted is called radiation. This radiation takes two forms—as particles (which we don’t need to consider!) and as traveling rays. This second type is known as electromagnetic radiation, created by photons traveling in regular waves at the speed of light.

We are exposed to electromagnetic radiation every day, because, whether we can see them or not, these different wavelengths and frequencies create various forms of light. Radio waves, microwaves, infrared, visible, and ultraviolet light, X-rays, and gamma rays are all part of the electromagnetic light spectrum.

Different types of radiation on this spectrum have different wavelengths and different frequencies, and produce different amounts of energy. Longer wavelengths mean lower frequencies and less energy. Because X-rays have shorter wavelengths and higher frequencies than, for example, radio waves and visible light, they have more energy.

How Do Dental X-rays Work?

An X-ray machine produces a very narrow beam of X-ray photons. This beam passes through the body and captures images of our teeth and jaws on special film or digital sensors inside the mouth (intraoral X-rays), or on film or sensors located outside the mouth (extraoral X-rays). These X-ray images are also known as radiographs.

Why are X-rays able to take pictures inside our bodies? Remember that higher energy we talked about earlier? This energy enables X-rays to pass through the softer, less dense parts of our bodies, which are seen as gray background in a radiograph. But some substances in our bodies absorb X-rays, such as the calcium found in our bones and teeth. This is why they show up as sharp white images in radiographs. 

There are many different types of dental X-rays used in orthodontics, including:

• Occlusal X-rays, which show the entire arch of teeth in the upper or lower jaw.
• Panoramic X-rays, which use a special machine to rotate around the head to create a complete two-dimensional picture of teeth and jaws.
• Cephalometric X-rays, which show the patient’s entire profile, and the position and development of the teeth and jaws.
• Cone Beam Computed Tomography, an external device which uses digital images to create a three-dimensional picture of the teeth and jaws.

Why Do We Need X-rays?

You might have noticed that these X-rays, unlike, for example, typical bitewing X-rays, don’t take images of individual teeth. That is because orthodontists deal with the teeth in relationship to each other and to the structures around them.

Beautifully aligned teeth and a healthy bite are the visible result of your orthodontic work, but there’s a lot going on above and below the surface that needs to be discovered and taken into account before your treatment even begins. X-rays help us evaluate:

• The size, shape, and position of your teeth, including impacted teeth and wisdom teeth
• The size, position, and health of your roots throughout treatment
• The size and shape of your jaw bones, and how they affect your teeth alignment and bite
• Your progress during different phases of treatment

How Do Orthodontists Make Sure Your X-rays Are As Safe As They Can Be?

First of all, the amount of radiation you are exposed to with a dental X-ray is very small. In fact, a typical panoramic X-ray provides roughly the same amount of radiation we are exposed to through our natural surroundings in just one day. Even so, Dr. Groisser and our team are committed to making sure patients are exposed to as little radiation as possible.

Radiologists, the physicians who specialize in imaging procedures and diagnoses, recommend that all dentists and doctors follow the safety principal known as ALARA: “As Low As Reasonably Achievable.” This means using the lowest X-ray exposure necessary to achieve precise diagnostic results for all dental and medical patients.

The guidelines recommended for X-rays and other imaging have been designed to make sure all patients have the safest experience possible whenever they visit the dentist or the doctor. We ensure that imaging is safe and effective in a number of ways:

• We take X-rays only when they are necessary.
• We provide protective gear, such as apron shields and thyroid collars, whenever needed.
• We make use of modern X-ray equipment, for both traditional X-rays and digital X-rays, which exposes patients to a lower amount of radiation than ever before.
• When treating children, we set exposure times based on each child’s size and age.

And now that we’ve talked about some things you might like to know,

Please Let Us Know If . . .

• You are changing orthodontists and have had previous orthodontic X-rays taken. Ask to have your older X-rays sent to our office so we have a complete record of your orthodontic history. (With digital X-ray technology, this transfer can be accomplished with e-mail!)
• You’re pregnant, or think you might be pregnant. Even though radiation exposure is very low with dental radiographs, unless there is a dental emergency, dentists and doctors recommend against X-rays for pregnant patients.

X-rays play an important part in helping us make sure your orthodontic treatment provides you with a lifetime of beautiful and healthy smiles. If you have any concerns, contact our Clarksburg, Gaithersburg, and Hagerstown office. When it comes to making sure you’re comfortable with all of our procedures, including any X-rays that might be necessary, we’re happy to give you all the inside information!